Adsorb-it

• Highly adsorbent – holds up to 20 times its weight in oil
• Greatly reusable, time after time
• Recycled from remnants from textile manufacturing.

Spills on solid ground; spills on still or flowing water; suitable for spills on uneven surfaces

• ADsorb-It is ready to use out of the box.
• Apply ADsorb-It to the spill – the adsorbent properties will hold the oil to the surface matrix of the fabric.
• Remove the pads once fully saturated.
• In water, apply pads or a roll to  mop up the spill – the wicking effect will bring the oil to the top of the fabric.
• Wash ADsorb-It in FleetKleen (diluted at 15 parts water to 1 part FleetKleen), so the pads can be reused many times over.

ADsorb-it can be supplied in:

• Pack of 50 x 14inch square pads
• Rolls – 5ft wide, cut to length