Benefits
A highly-effective cleaner/ degreaser for FOG contamination on hard surfaces and within drainage systems and fat traps.
• Cost-effective
• Easy to use
• Reduction of contaminant FOG from waste water
• Non-hazardous to the environment
Suggested Uses
For floors and drainage systems in food processing and food service facilities.
How to Use
Easy to use
FPT-600 is supplied as a concentrated liquid, it must be diluted with water to be effective.
Using a pressure washer – insert the mixing tube directly into the container of FPT-600. Dilute 1 part FPT-600 to 15 parts water and apply directly to greasy areas, allowing the area to remain wet as long as possible. Wash excess solution into the drainage system where FPT-600 will continue to degrease the pipes and start to bioremediate the FOG contamination.
Manual sprayer and brush – pre-mix 1 part FPT-600 to 15 parts water. Spray the affected area, leave for a couple of minutes then agitate and aerate the area with a stiff brush or broom. Allow the area to remain wet as long as possible.
Product Information
Non-hazardous to the environment: pH Neutral, biodegradable and sustainable.
FPT-600 is supplied in:
20L cases (2 x 10L bottles)
FPT-600 is part of a range of bioremedial solutions for FOG, FPT-500 and FPT-400 are also available.